![background image](http://html2.mh-extra.com/html/keithley/2701/2701_user-manual_3950600364.webp)
14-4
FORMat and Misc SYSTem Commands
Model 2701 User’s Manual
Miscellaneous SYSTem commands
SYSTem commands not covered in other sections of the manual are documented here.
Table 15-7 lists all SYSTem commands and provides references on where to find more
information.
SYSTem:PRESet
Returns the instrument to states optimized for front panel operation. SYSTem:PRESet
defaults are listed in the SCPI tables in Section 15.
NOTE
*OPC or *OPC? should be used with SYST:PRES, which is slow responding
command. Details on *OPC and *OPC? are provided in Section 12.
SYSTem:VERSion
Read the version of the SCPI standard being used by Model 2701. Example response
message: 1996.0.
SYSTem:KEY <NRf>
Parameters
1 = SHIFT key
15 =
Cursor right arrow key
2 = DCV key
16 =
TEMP key
3 = ACV key
17 =
LOCAL key
4 = DCI key
18 =
EX TRIG key
5 = ACI key
19 =
TRIG key
6 =
Ω
2 key
20 =
STORE key
7 =
Ω
4 key
21 =
RECALL key
8 = FREQ key
22 =
FILTER key
9 = -------
23 =
REL key
10 = -------
24 =
Cursor left arrow key
11 = RANGE up arrow key
25 =
-------
12 = AUTO key
26 =
OPEN key
13 = RANGE down arrow key
27 =
CLOSE key
14 = ENTER key
28 =
STEP key
29 =
SCAN
key
30 =
DIGITS
key
31 =
RATE
key
32 =
EXIT
key
This command is used to simulate front panel key presses. For example, to select the volts
measurement function, send the following command to simulate pressing the “DCV” key:
SYSTem:KEY 2. The key-press codes are also shown in Figure 14-2.
2701-900-01.book Page 4 Wednesday, August 3, 2011 9:43 AM
Summary of Contents for 2701
