![background image](http://html.mh-extra.com/html/keithley/2601a/2601a_user-manual_661721063.webp)
2600AS-900-01 Rev. B / September 2008
Return to
3-9
Series 2600A System SourceMeter
Section 3: Test Script Processor Interaction
1.
The
Run
configuration box is used to launch (load) a user script into the Series 2600A and
save it in nonvolatile memory. As shown below, open the
Run
box and then click
Run
in the
drop-down menu:
NOTE
and
show how the Run box will look after the
launch is configured.
2. In the Configurations area of the Run box, select the KIGeneral script. The launch
configuration tabs for that script will appear in the Run box.
3. Presently, the name of the script is KIGeneral. You should change the name so the script is not
confused with the factory script of the same name that is stored in the Series 2600A. For
example, change the script Name to “KIGeneralUser” and click the
Apply
button.
4. As shown in
, the main.tsp file must be in the Load Order area of the Run box. If it is
in the Available Project Files area, double-click main.tsp to move the file over.
5.
Click
the
Script Attributes
tab to display the load and store options and select the
LoadOnly
run action and nonvolatile storage as shown in
.
6.
Click
the
Apply
button to set the run configuration.
7.
Click
the
RUN
key to load the user script into nonvolatile memory of the Series 2600A.
NOTE There is a small bar graph at the bottom-right of the Test Script
Builder that will appear while a script is loading. The bar graph will
continuously sequence through its segments while the script is
loading.
Click
Run
and then click
Run
in the drop-down menu.