Keithley 2601A User Manual Download Page 42

Page: 42 / 94

2-10

Return to

Section Topics

2600AS-900-01 Rev. B / September 2008

Section 2: Remote Operation

Series 2600A System SourceMeter® Instruments User’s Manual

Issuing ICL commands

Use the console to send ICL commands to the instrument. The response from the instrument
appears in the Instrument output window.

Complete the following steps to send an ICL command:

Type the command in the console and then click

Enter

(Optional) Click

Clear

to clear the instrument output window.

How do I create a script with TSB embedded?

Complete the following steps to create a new script:

Click the script editor window and then type the first line of your script. Click

Enter

advance to line 2.

In the TSP Script line, type the name of the script and then click

Save script

The instrument validates the syntax and then saves the script to the nonvolatile memory.

How do I clear the script editor window in TSB embedded?

•

To remove the syntax from the script editor, click

Clear

How to run scripts with TSB embedded

•

To run a script, select the desired script from the User script window and then click

Run

How to stop scripts in TSB embedded

To stop a running script, click

Abort script

Deleting scripts

To delete a script from TSB embedded, select the desired script from the User script window and
then click

Delete

NOTE You cannot retrieve a deleted script.

Modifying scripts

Complete the following steps to modify a script:

Select the desired script from the User script window and then modify the desired syntax in
the script editor.

Click

Save

script to validate the syntax and save the script.

When the message “Script clearing will be overwritten” is displayed, do one of the following:

•

To overwrite the script, click

•

To save the script with a new name, click

Cancel

and then type the name of the script in the

name field.

Exporting Scripts

You can export a script to an external drive or store it as a backup on your PC.

To export a script, click on the name of the script in the Users script window and then click

Export

The

Save

dialogue box is displayed.

Summary of Contents for 2601A































































































Search results

Summary of Contents for 2601A

Reviews:

Keithley 2601A, User Manual, Page: 42 / 94

Search results

Summary of Contents for 2601A

Reviews: