manualshive.com logo in svg

Keithley 2601A, User Manual, Page: 69 / 94

Share
Download
Keithley 2601A User Manual Download Page 69

2600AS-900-01 Rev. B / September 2008

Return to 

Section Topics

3-15

Series 2600A System SourceMeter

®

 Instruments User’s Manual

Section 3: Test Script Processor Interaction

Call send(Addr%, "localnode.showerrors = 
0", intStatus)

‘

Disable automatic display of errors 

‘

leave error messages in queue and 

‘

enable Error Prompt. The "localnode" is 

‘

unit being communicated with via GPIB 

‘

or

 

RS-232.

Call send(Addr%, "localnode.prompts = 
1", intStatus)
strReturnMessage = udfGetTspResponse()

‘

Turn on prompts; need to start 

‘

handling the prompts as soon as this 

‘

command is sent.

Open App.Path & "\" & 
"MeasCurrScript.tsp" For Input As #1

‘

Open the script file for sequential 

‘

input.

Call send(Addr%, "loadscript 
MeasCurrScript", intStatus)
strReturnMessage = udfGetTspResponse()

‘

"

loadscript" identifies the beginning 

‘

of the script. "MeasCurrScript" is the 

‘

name assigned to the script.

 

‘

Read the file

.

Do While Not EOF(1) 

‘

Loop until the end of the script file.

Line Input #1, strScriptline 

‘

Read a line from the script file.

Call send(Addr%, strScriptline, intStatus)

‘

Send script line to Series 2600A.

strReturnMessage = udfGetTspResponse()

strReturnMessage = Left(strReturnMessage, 
4)

Select Case strReturnMessage

Case ">>>>" 

 

 

 

Case "TSP>"

‘

Continuation prompt.

 

‘

TSP received script line successfully; 

‘

waiting for next line.

 

 

‘

Ready prompt.

 

‘

TSP received script successfully; 

‘

ready for next command.

Exit Do
Case "TSP?"

‘

Error prompt.

 

‘

Error occurred; handle as desired.

 

‘

Use "errorqueue" commands to read 

‘

and clear errors.

Case Else

‘

No prompt received.

 

‘

Response other than shell prompt was 

‘

received; handle as desired.

End Select
Loop
Close #1

‘

Close the script file.

Call send(Addr%, "endscript", intStatus)
strReturnMessage = udfGetTspResponse()

‘

Tell TSP complete script has been 

‘

downloaded.

Call send(Addr%, "localnode.prompts = 
0", intStatus)

‘

Disable prompts.

Summary of Contents for 2601A































































































Reviews:

No comments