In this section:
Introduction .............................................................................. 7-1
Introduction
This section is broken into two examples:
Example 1
demonstrates how to generate a basic linear voltage sweep with the Model 2290-10 to
reverse bias a high voltage diode and make leakage current measurements at each point of the
sweep.
Example 2
demonstrates basic interaction of the Model 2290-10 high voltage power supply with a
Model 263xB System SourceMeter. The Model 2290-10 is used to generate a basic linear voltage
sweep across the diode and the Model 263xB is used to make a leakage current measurement on the
diode.
Program example 1
Linear voltage sweep and current measurements with Model 2990-5
Equipment needed:
•
1 high-voltage diode enclosed in a safe test fixture
•
1 Model 2290-10 high-voltage power supply
•
1 GPIB cable to connect the Model 2290-10 to a computer with a GPIB interface
•
Appropriate cabling to connect the Model 2290-10 to the test fixture
Section 7
Typical applications