Troubleshooting
2-55
2.11.10 Input buffer tests
Test 303.1 — Input buffer
Type
Pass/Fail
Fault message
Input buffer
Description
This is the first test in the series that actually takes a measurement from the BUFFIN line by us-
ing the R1_STB default condition described earlier (see the discussion on default state in para-
graph 2.11.5). Common is switched through U244 pin 11 to 10, through Q226, the lower leg of
the R335, R339, R341, R346 series parallel combination, through Q242 to BUFFIN. BUFFIN
goes into the bootstrap supply and U245 input buffer (including the U249 servo). The input buff-
er output, BSCOM, goes through Q207 and Q208 to pin 3 of U226. The A/D MUX gain is X1.
Drawing reference
Analog Board; 2002-100
Components
U226, U244, U245, and associated components.
Bit patterns
Bit pattern*
Register
—U400—
01111011
—U811—
00001101
—U224—
00010111
—U432—
10000000
—U810—
00000011
—U206—
01100000
—U203—
10001110
—U411—
11111011
—U809—
11100111
—U207—
00001111
—U221—
11101001
—U406—
00000100
AD_STB
MUX_STB
R1_STB
R2_STB
*Bits associated with register IC terminals as follows:
Q
Q
Q
Q
Q
Q
Q
Q
87654321
87654321
87654321
87654321
IC pins: Q8=11, Q7=12, Q6=13, Q5=14, Q4=7, Q3=6, Q2=5, Q1=4.
