Keith LeakProof III Owner'S Manual Download Page 6

OWNER / OPERATOR MANUAL 

LeakProof III

        

 

 

 

 

 

DOC06436  Rev B

Warranty Registration Card

Note:

 To validate the warranty, the registration information must be filled out completely and returned to KEITH 

within ten (10) days of purchase and/or installation.

Please fill out the Warranty Registration form on our website at www.KeithWalkingFloor.com or fill out the 

Warranty Registration Card below and mail or email it to:

KEITH Manufacturing Co.

P.O. Box 1

Madras, OR 97741-0001

[email protected]
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

This warranty registration card must be completed and on file at KEITH in order for the warranty period to 

begin on the purchase date. If no purchase date is registered, the beginning of the warranty will automatically 

revert to the manufacture date.

Name / Company Name: _______________________________________________________________

Address: ____________________________________________________________________________

City, State / Prov.: ___________________________________________ Postal Code: ______________

Country:____________________________________________________________________________

Phone: _____________________________________________________________________________

E-Mail: _____________________________________________________________________________

SYSTEM DATA:

Date of Purchase: ____________________________________________________________________

Model / Serial Number: ________________________________________________________________

Purchased From: ____________________________________________________________________

Type of Material Loaded/Unloaded: ______________________________________________________

I have fully read the KEITH Manufacturing Co. warranty information and fully understand and agree to the 

terms of the warranty.

Name: ___________________________ Date: __________ Signature: __________________________

Summary of Contents for LeakProof III



















Reviews: