25
DOC06179 Rev. B
OWNER / OPERATOR MANUAL
RUNNING FLOOR II
®
DX / DXE
3.9 Electric On/Off & Electric Load/Unload - Wireless Remote Control
3.9.1 4 Channel Remote Control Transmitter
1. Before operating, follow the Pre-Trip Check List.
2. Open truck or trailer doors fully and secure doors with provided chains or loop rings.
⚠
CAUTION: ALWAYS have doors fully open! Do not, under any circumstances, engage the Power
Take Off (PTO) / Pump System or
WALKING FLOOR
® unloader with the doors of the truck or trailer
closed. Catastrophic failure to the trailer, as well as serious injury or death may occur.
3.
Inspect hydraulic hoses and quick connects for damage, then connect the floor to the truck wet
kit (If applicable).
4.
Engage the PTO, then bring the truck engine up to the RPM to achieve desired flow rate from the
wet kit.
5. Turn ON the remote receiver by twisting the EMS button clockwise to disengage the EMS
(emergency stop) button. (The button will pop up.)
EMS - Emergency STOP
Power ON Key
A (Unload)
C (Right)
ID Plate
Status Indicator LED
(Load) B
(Left) D
Summary of Contents for KRFII-3
