30
DOC06179 Rev. B
OWNER / OPERATOR MANUAL
RUNNING FLOOR II
®
DX / DXE
6. There are two ways to put the Ball Valve (On/Off) of the drive in ON-position
A) Move the red handle to the driver’s side as in image below. (See image below.) The floor will
start to move! Take into account that the system can be left-hand (LH) or right-hand (RH) drive.
B) Push the red button in (1) and turn it a half turn counter clockwise (2). Release the red button
and it will pop out. (See image below.) The floor will start to move!
7.
The floor can be stopped by returning the red handle or red button to the original position.
8. After using the system, return the red solenoid buttons to the original position.
RH – ON
LH – OFF
RH – OFF
LH – ON
Manual Override - Ball Valve (handle)
1
2
Manual Override - Ball Valve (solenoid)
Summary of Contents for KRFII-3
