![background image](http://html.mh-extra.com/html/keiser/m-series/m-series_assembly-and-operation-manual_661500007.webp)
M3i INDOOR GROUP CYCLE
07
ASSEMBLY
•
To help prevent damaging parts during assembly,
do not use power tools.
•
Substitution or modification of any part or
component, other than what is provided by Keiser,
will void your warranty.
•
Left-hand side Pedal is marked “CR-L” and right-
hand side Pedal is marked “CR-R.”
•
Keep the packing materials until you successfully
finish all assembly steps.
•
Keiser Corporation is not responsible for
damage or injury caused by incorrect assembly/
installation, use, or improper care/maintenance.
BEFORE ASSEMBLY...
AFTER ASSEMBLY...
Protect your investment and ensure longer equipment life. Apply a quality rust and corrosion inhibitor to the following
parts and areas after assembly, annually thereafter:
•
Left Bottom Bracket Bearing
•
Clip-in area of each Pedal
See "Proper Operation Check" on page 14 for application locations. For complete equipment care information, refer
to the "Preventative Maintenance Schedule" on page 22.
TOOLS AND MATERIALS REQUIRED
UNPACKING
•
Scissors
•
Cutting Pliers
•
1/2-inch (13 mm) Wrench
if Shipping Board is present
ASSEMBLY
•
#2 Phillips Screwdriver
•
Two 10 mm Open-end Wrenches
•
15 mm Open-end Wrench
•
15 mm Crowfoot
•
16 mm Open-end Wrench
•
16 mm Crowfoot
•
Ratchet
•
6-inch Ratchet Extension
•
Torque Wrench
up to 35 ft-lbs / 47 Nm
•
5 mm Hex Key
•
6 mm Hex Socket Bit (long bit recommended)
MATERIALS
•
Clean Cloth
•
Rust and corrosion inhibitor
Note for in-home users: The M3 Series Tool Kit (PN 550887, sold separately) contains all the assembly tools listed
above, including tools for unpacking (1/2-inch Wrench only), seat adjustment (14 mm Socket), and battery replacement
(#1 Phillips Screwdriver).
UNPACKING
IMPORTANT: AVOID EQUIPMENT DAMAGE, DO NOT USE BOX CUTTERS.
Place all parts in a cleared area and check for missing parts (refer to the Parts List and Hardware & Fittings sections in
the following pages). Parts damaged in shipping or missing? Contact Keiser Customer Support (see back page for contact
information).
HEAVY OBJECT: HELP REQUIRED WHEN LIFTING.