T-506 User Manual Version 3.2 | 22
5.6.1.2
Test result display area
The left side records the delay of the fault sound compared to the magnetic signal as
identified by the T-506 intelligent algorithm; the right side shows the position of the T-506
detector probe relative to the cable path.
[
Note
] The dot represents the detector, the straight line represents the test cable path, the
dot in the “L” area represents the
detector to
the left of the cable path, and the “R” area
represents the detector to the right of the cable path.
5.6.1.3
Sound and magnetic field information display area
The gain adjustment knob and gain value display are shown. The electronic knob can be
rotated to adjust the signal gain which can be set from a minimum of 0, to a maximum of
100%, the default value is 70%.
The progress bar in the lower half indicates whether the T-506 is synchronising the
acquisition of sound and magnetic field signals, as well as the amplitude changes of the
acquired signals.
[
Note
] When the T-506 is triggered by the magnetic field signal, the progress bar will jump
from low to high, and its highest value represents the maximum value of the amplitude of
the sound or magnetic field signal at the time of the trigger.
