KEHUI T-506, User Manual, Page: 21 / 34

T-506 User Manual Version 3.2 | 21
5.6 Button and Area function introduction
5.6.1 Operator Mode (1) Button function
Button Function
Mute or unmute the APP sound
Select the filter mode of the sound channel. The
submenu functions are as follows:
‘Low pass’ band set to 100Hz - 400Hz
‘Bandpass’ band is set to 150Hz -600Hz
‘High Pass’ band is set to 200Hz - 1500Hz
‘All - pass’ band is set to 100Hz -1500Hz
(Power on defaults to ‘All - pass’ state) ‘Confirm’
Set the selected filter mode
‘Cancel’ Exit Filter Settings submenu
Remote assistance interface.
Access to language, software upgrades, menu bar
and about us.
Switch to Waveform mode
5.6.1.1 Information
This message will appear to provide confirmation of the current test status and the
identification of the fault-discharge acoustic signal by the T-506 intelligent algorithm (e.g.,
magnetic field trigger, fault found).