49
Check cylinder if warp.
Service limit: 0.05 mm
Measure clearance between piston rings
and grooves.
Service Limit: Top ring: 0.09 mm
2
nd
ring: 0.09 mm
Remove piston rings
Check if the piston rings are damaged or its
grooves are worn
Caution
Place piston rings respective into cylinder
below 20 mm of cylinder top. In order to keep
the piston rings in horizontal level in cylinder,
push the rings with piston.
Service Limit: Top ring: 0.50 mm
2
nd
ring: 0.65 mm
Pay attention to remove piston rings
because they are fragile.
Summary of Contents for ATV300
