82
air bubble in the radiator coolant, also the coolant
liquid level is stable.
·
·
·
·
Stop the engine. Add coolant to proper level if necessary.
·
·
·
·
Screw and tighten up the radiator filler cap
Caution
Coolant recommended: SYM Bramax radiator agent.
oncentration: 50%
Check reserve tank
·
·
·
·
Remove the front center cover, and then remove
reserve tank filler cap.
Check the liquid level in the front fender right
side. Add coolant to proper level if too low.
Reinstall the reserve tank filler cap.
Caution
10-6 Radiator
Check
·
·
·
·
Remove the front center cover, side covers and front
fender.
(refer chapter 13)
, check for any leakage from weld
seam.
·
·
·
·
Blow radiator clean using compressed air. If the radiator
is blocked by dirt, use low pressure water jet to clean it.
·
·
·
·
Care shall be taken when straightening the sink fan.
Removal
·
·
·
·
Place a water pan under the water pump; loosen the
drain bolt to drain out the coolant.
Remove coolant filler pipe.
In order to avoid the water tank rusting,
please do not use the unclear trade mark
refrigerant.
The reserve tank liquid level coca too is not high,
after avoids the water temperature elevating, in the
cooling system the refrigerant backflow floods.
UPPER LOWER
FILLER PIPE CLAMP
Summary of Contents for ATV300
