KEEWAY ATV300, User Manual, Page: 64 / 110

64
Clutch weight Replacement
Remove snap ring and washer, and then remove
clutch weight and spring from driving plate
Caution
Check if spring is damage or insufficient elasticity.
Check if shock absorption rubber is damage or
deformation. Replace it if necessary.
Apply with grease onto setting pins
Install new clutch weight onto setting pin and then
push to the specified location.
Apply with grease onto setting pins.
But, the clutch block should not be greased. If so,
replace it.
Caution
Install the spring into groove with pliers.
Some of models are equipped with one
mounting plate instead of 3 snap rings.
Grease or lubricant will damage the clutch
weight and affect the block’s connection
capacity.