88
11.4 THROTTLE HOUSING
DISASSEMBLY
·
·
·
·
Loosen the screws on the throttle housing cover.
·
·
·
·
Remove throttle housing cover and gasket.
·
·
·
·
Disconnect throttle cable from the throttle arm
and remove from the throttle housing.
NOTE:
Assembly is in the reverse order of disassembly
11.5 STEERING SYSTEM
Removal of Kingpin and Tie-rod
Remove the front wheels and hub assy.
Remove the four self-lock nuts from the tie-rod ball
joints and take off the two tie-rods
Tie-rod Inspection
Inspect the tie-rod for damage or bending.
Inspect the ball joint rubbers for damage,
wear or deterioration.
Turn the ball joints with fingers. The ball joints
should turn smoothly and quietly
SCREWS
Summary of Contents for ATV300
