Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 28 of 35
3.2 Adjusting the squareness
NOTE: Before making any adjustments carry out the squareness check as described in
Checking the machine for squareness>
It is assumed that the board used for the test is still clamped in
the machine. From the test results determine if the last cut made
in the top of the board is to the left or right of the previous cut.
Use a 5mm Allen (Hex) key to slacken the two screws joining
the squaring arm to the two legs.
