Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 19 of 35
2.4 Fitting the support arms & wall mounted bracket
Get help to slowly lift the machine and lean it so the front faces
towards the wall. Carefully place a scrap of card or board
between the top end of the machine and the wall to prevent any
damage.
Be careful when lifting
NOTE: Ensure the machine is tied or held in position safely whilst the following steps are carried out.
Replace the screw and two washers in the squaring arm using
the 3mm Allen (hex) key.
Do this firmly
