Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 17 of 35
Fit the screws through the squaring arm into the leg using the
5mm Allen (hex) key, do not tighten fully.
Do this gently
Refit the squaring adjuster block by firstly sliding the steel bar
into the opening in the squaring arm, then align the heads of the
two screws in the leg to fit the top and bottom holes in the
adjuster block. The screws fixing the squaring arm to the
machine should still be loose and allow it some movement to
help alignment. Insert and tighten the screw in the middle hole.
