Excalibur 3S installation manual
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
[email protected] (UK HQ)
[email protected] (US sales)
Scan the QR code or
click here to view this document online >
Page 20 of 35
Fit the two screws to secure the legs at the top of the main body
using the 6mm Allen (hex) key, tighten both screws fully. Tighten
the other two adjacent screws.
Do this firmly
NOTE: The screws fit into special grooves in the underside of the supports. The grooves have teeth on their sides to match
the teeth of the screw thread, the screw can be fitted in the groove anywhere along its length but be careful to make sure
the screw is kept perpendicular to the Support and not screwed in out of line.
Use one of the long screws in each of the holes along the legs of
the machine and short screws to fix the support arm to the main
body. Ensure the ends of the supports are firmly against the main
body and the screws are aligned with the special grooves as
explained above.
