![background image](http://html1.mh-extra.com/html/keeley/eccos/eccos_instruction-manual_660703009.webp)
9
ECCOS DELAY/LOOPER
PRESET SELECT MODE
- To enter Preset Select
Mode (while in delay mode), quickly double tap
BYPASS or tap the FDBK knob once. Preset LEDs will
begin to flash. The TAP switch or MODE select switch
advances through the presets. Tap BYPASS again to
select the preset currently flashing. Hold BYPASS to
overwrite the selected preset.
CHANGES TO A PRESET
- Any changes made to a
parameter will turn OFF the preset LED. Double tap
the BYPASS switch again to once again enter preset
select mode, then hold the BYPASS switch to enter
save mode, cycle through the presets by using the
TAP or MODE switch, then hold the BYPASS switch
again to save the changes made to the selected
preset.
The ECCOS features 3 preset locations. In addition,
you can access a What You See Is What You Get
(WYSIWYG) mode by entering Preset Select Mode,
then scrolling through the preset locations until all
3 Preset LEDs are blinking, then select it by tapping
the BYPASS switch. This is a great way to exit any of
the three preset settings and go back to where the
controls are currently set.
SWITCH PRESETS WHILE LOOPING
- Switch
to Delay mode, single tap the FDBK knob, cycle
through the presets by pressing TAP, then engage
the new preset by tapping the BYPASS switch.
Note: When the WYSIWYG preset is selected, it will
recall all of the previous (non-preset) secondary and
expression control positions. All of the main controls
are set to the pots current positions. Similar to a
preset but only for the secondary and expression
controls, the pots are read at their current positions.
The three lights in the middle of the ECCOS are
preset indicators, which will correspond with the
currently engaged preset. In WYSIWYG mode, all
three are constantly lit.
CREATING AND SAVING PRESETS
Summary of Contents for ECCOS
Page 1: ...INSTRUCTION MANUAL ...