![background image](http://html1.mh-extra.com/html/keeley/eccos/eccos_instruction-manual_660703006.webp)
SECONDARY DELAY CONTROLS
Access four alternate tone and time shaping controls by pressing and holding the FDBK control while turning other controls
6
1
3
2
5
4
1
2
3
4
5
MANUAL (Flanger Time)
- Subtly changes the
delay time of the flange. Ranges ~0 - 13ms. With
longer times, the delays become more chorused.
Set at minimum by default.
VIBE (Modulation Style)
- Flanged delay trails are
created by producing two repeats that are blended
together. The VIBE knob controls the clean portion
of your delays. Turn CCW for pitch vibrato. Turn CW
for flanging repeats. Set at max by default.
TONE
- Tone control for the repeats. Set it high for
a sweet high-pass sheen. Set it lower for a warm,
tape style high-end roll off. Set at noon by default.
REGEN (Flanger Regeneration)
- Controls the
amount of flanger feedback. Increasing this control
will give you deep flanging effect for your delays.
Set at minimum by default.
SUBDIVISIONS
- Like all secondary controls,
hold down the FDBK knob. While knob is held
down, toggle the mode switch to set delay-time
subdivisions: Quarter, Dotted Eighth, Eighth, or Triplet.
The Status LED will blink the current subdivision while
FDBK is held down. Set at quarter note by default.
Hold down the FDBK knob to access
secondary controls.
Summary of Contents for ECCOS
Page 1: ...INSTRUCTION MANUAL ...