Overview
12
1.5.6 Inserting a module
KDM201S has eight slots at the rear panel which is used for inserting modules, such as encoder and
decoder.
Clear the dusty on the stand before inserting a module, and take out the encoder or decoder module
from the anti-static package, then check the name on the module to confirm it is coordinate with the label
on the package.
Insert a module:
Push the module along the rail until it is blocked.
Fix the two screws besides the module.
Loosen the screws to take out the module.
Notice: Avoid touching the circuit and other components on the module while inserting the module.
Summary of Contents for NVR2820-16
Page 1: ...NVR Administrator Guide ...
