NAT Settings
48
2.2.1 NAT Settings of the LAN
Set the NAT of the LAN at the NVR end, map the signaling port (TCP) 1730 of the NAT into port 1730 of
the NVR, and map the packet port (UDP) 11988 of the NAT into port 11988 of the NVR.
2.2.2 NVR Settings
Set Local Port Receiving NVR Station Detection Packets, Nat mapping port and DVS mapping port.
Method for entering the interface: Select
Main Menu
Æ
Settings
Æ
Network
Æ
NAT
, as shown in the
following figure:
2.2.3 NVR Station Settings
When an NVR Station in different NAT is connected to the NVR, the IP address of the NAT must be used
to replace that of the NVR. The connection port keeps unchanged.
Method for entering the interface: open and log on. Select NVR. Select
Connection Properties
from the
right-click menu. Change the NVR IP. Change the NVR IP to the IP of the NAT, as shown in the following
figure:
Summary of Contents for NVR2820-16
Page 1: ...NVR Administrator Guide ...
