Kedacom NVR2820-16, Administrator'S Manual

Page: 32 / 67

Network Configuration
27
3 Network Configuration
The NVR supports deployment of diversified networks:
♦
LAN: all devices are deployed over the same LAN.
♦
WAN: all devices are deployed over the WAN (fixed IP or dial-up network), supporting DDNS.
Hybrid network: the NVR is deployed over an Intranet, while the NVR Station accesses via an Extranet,
supporting NAT traversal and Socks5 proxy.
Configure network from:
♦
Main Menu Æ Wizard/Network Settings
♦
Main Menu Æ Network
3.1
LAN Settings
NVR2820 、 NVR2820E and KDM201S have an ETH adapters. NVR2860 have two ETH adapters, please
confirm your connections before configure.
Parameter Description
IP address
The NVR may have several IP addresses. If it is over a public network, it is
recommended that the IP of the LAN be filled in as its first IP, and the
internet IP as the second one.
KDM201S have to configure two IP addresses. Fill in the internet IP address
as its first IP, and the LAN IP address as the second one which is DHCP
server IP address.
Subnet mask
the subnet mask;
Default GW
the gateway address;
DNS Server
If the DDNS service is enabled for the NVR, fill in the available DNS IP over
the public network here;
SNTP Server
IP of the SNTP server;
Web Service Port
When the NVR Station access the NVR by domain name, the default port is
80, you can modify the port here.
NVR Station Connect
port
The default port is 1730, if changed, be sure to connect the right port by
NVR Station.
Local Port Receiving
NVR Station Detection
packets
When NVR Station is located in the NAT, please configure it.
Enable auto
After the auto networking is enabled, the video unit over the surveillance
network will automatically add to the NVR without manual adding.