Kedacom NVR2820-16 Administrator'S Manual Download Page 46

Page: 46 / 67

NVR Station

7 NVR

Station

The NVR management system (NVR Station) provides user-friendly operation interfaces for remote
access, featuring simple and easy to use.

The NVR Station provides two modes: software setup and WEB access.

The NVR Station supports a maximum of 128 NVR, supporting the following functions:

♦

Video surveillance

♦

Device configuration

♦

Live update

Requirement for operating environment:

Hardware environment:

PC (recommended configuration for 8-screen browse: Pentium 4 2.8 G or

above; memory: 512M or above. recommended configuration for 16-screen browse: Intel Pentium D 820
2.8GHz; memory: 1G or above.

Software environment:

Windows2000 or later (IE6), Windows XP recommended.

Notice: If a firewall is installed on your PC, please set the NVR Station as trusted.

7.1

Installation and Removal of Local Software

Installation of Local Software

Double click the setup file <NVRSetup.exe> to start installation, select language to install, and click

Next

go on. The installation is completed and a shortcut icon

will be created on your desktop.

Removal of local software

Select

Control Panel

Add/Remove Programs

. Select the NVR Station and click Remove to uninstall

the software.

7.2

WEB Access to NVR

Enter the IP address or domain name into the IE address bar. For the initial use, a safety alert appears,

Click Install. The login interface automatically appears after completion of installation.

Enter the username and passport in the popup interface

。

The default username and password both are

admin

。

Summary of Contents for NVR2820-16




































































Search results

Summary of Contents for NVR2820-16

Reviews:

Related manuals for NVR2820-16

Brands by name

Popular brands

Kedacom NVR2820-16, Administrator'S Manual

Search results

Summary of Contents for NVR2820-16

Reviews:

Related manuals for NVR2820-16

Brands by name

Popular brands