NAT Settings
47
2 NAT
Settings
The NVR, Camera and NVR Station are located in WAN/LAN. When they are in the same LAN, NAT
setting is unnecessary. If any of them is in different network and needs mutual access, NAT access
setting is needed.
Notice: when NAT is set in the surveillance network, to make full use of all functions of the surveillance recording
system, enable the TCP ports in NAT: 5510, 1730 and 15510.
2.1
NVR Station Located in NAT
When the NVR Station is located in a LAN, the LAN is configured with NAT and the NVR is located in a
public network, the NAT setting is completed automatically for the NVR Station to access the NVR, so
the user does not need to make setting.
2.2
NVR Located in NAT
When the NVR is located in the LAN, the WAN is configured with NAT and the NVR Station is in the
public network, the following setting is needed for the NVR Station to access the NVR:
Summary of Contents for NVR2820-16
Page 1: ...NVR Administrator Guide ...
