Kedacom IPC4X2 Series User Manual Download

Page: 55 / 112

HD Mini Dome Camera User Manual

5.5.1

Basic Configuration

Go to

Settings > Camera > PTZ > Basic Config

, and configure basic parameters of the

PTZ, as shown in the following picture.

Picture 5-25 Basic Configuration



Basic Config



PT Version: Display the version of current PT.



Patrol Speed Level: Configure speed level during patrol. The larger the value is,

the faster it patrols, vice versa.



Preset Point Speed Level: The speed level of loading presets. The larger the

value is, the faster it turns to the preset, vice versa.



Zoom Speed Level: Select zoom speed level, i.e. the speed level during

zooming in or out. Options include

“low”, “middle” and “high”.



Enable Auto PT Speed: Select the checkbox to enable. Under different fields of

view, the PT will rotate by the same linear speed. When it is zoomed out, the PT

will reduce its linear speed; zoomed in, increase.



Preset Video Freeze: Select the checkbox to enable. When the PT rotates from

one preset to another, the video freezes at the image of the first preset and

switches to that of the second preset when arriving at it without showing the

images during the move.



PTZ Position Display Format

: Options include “According to azimuth” and

“Display According to PT position”. Go to

Settings > Camera > OSD

and select

PTZ; then select “According to azimuth” on this interface, and the PT position

will show on the live view interface in azimuth format; when selecting “Display

Summary of Contents for IPC4X2 Series

















































































































Search results

Summary of Contents for IPC4X2 Series

Reviews:

Related manuals for IPC4X2 Series

Brands by name

Popular brands

Kedacom IPC4X2 Series, User Manual

Search results

Summary of Contents for IPC4X2 Series

Reviews:

Related manuals for IPC4X2 Series

Brands by name

Popular brands