manualshive.com logo in svg

Kedacom IPC4X2 Series, User Manual

Share
Download
Kedacom IPC4X2 Series User Manual Download Page 22

HD Mini Dome Camera                                                                                                                                  User Manual 

18 

 

 

Decelerate playing speed; click the icon to decelerate the speed of 
playing the video, one-click to decelerate by 1/2x and one more click by 
1/4x, max by 1/8x. 

 

Accelerate playing speed; click the icon to accelerate the speed of 
playing the video, one-click to accelerate by one time, max 8 times. 

 

Previous video section, click the icon to play the previous video section 
and user can click it continuously. The default skipping time in a 
continuous video is 1 hour. 

 

Next video section, click the icon to play the next video section and 
user can click it continuously. The default skipping time in a continuous 
video is 1 hour. 

 

Volume, click the button to enable sound and click again to disable 
sound. Drag the slide bar to adjust volume. 

 

ePTZ, click this icon to enable the ePTZ function. Left click and drag 
toward lower right to draw an area. The pixels of this area will be 
amplified and will cover the whole screen. Left click and drag toward 
upper left to draw an area, then image will recover. 

 

Snapshot, click the icon to capture current playback image. Save path 
for playback snapshots can be set in Settings > Local Setting. 

 

Clip, click this icon to start clipping current video and click again to stop 
clipping. Save path for clipped playback videos can be set in Settings > 
Local Setting. 

 

Download, click the icon to pop up the download interface. On the 
popup interface, configure the start time, end time and select video 
type(s) to download. Click "

Search

" to display expected videos on the 

list below. Select the files to be downloaded and click “

Download

”. 

User can view the download progress on the list. Save path for 
downloaded videos can be set in Settings > Local Setting. 

/

 

Zoom in/ Zoom out timeline, adjust the scale interval on the timeline. 
Click the icons to zoom in or zoom out the timeline. The scale intervals 
on the timeline include 5 min, 10 min, 30 min, 1 hour and 2 hours. 
Zooming of the timeline will not affect the playback of current video. 

 

Full screen, click this button to display the video in full screen. 
Double-click on the screen or press Esc to exit. 

3.3 Snapshot 

Click 

“Snapshot”

  to  enter  the  interface  of  snapshot  management.  User  can  view  or  download 

snapshots in SD card. 

 

Picture 3-6 Snapshot 

Summary of Contents for IPC4X2 Series

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands