KEB COMBIVERT G6, Programming Manual

Page: 13 / 60

13
Basic Safety Instructions
1 Basic Safety Instructions
The COMBIVERT is designed and constructed in accordance with state-of-the-art tech-
nology and the recognised safety rules and regulations. However, the use of such de-
vices may cause functional hazards for life and limb of the user or third parties, or dam-
ages to the system and other material property.
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specific safety instructions. This list is not exhaustive. Non-observance will lead to the
loss of any liability claims.
Attention
Hazards and risks through ignorance.
► Read the instruction manual !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB Automation KG !
1.1 Target group
This instruction manual is determined exclusively for electrical personnel. Electrical per-
sonnel for the purpose of this instruction manual must have the following qualifications:
• Knowledge and understanding of the safety instructions.
• Skills for installation and assembly.
• Start-up and operation of the product.
• Understanding of the function in the used machine.
• Detection of hazards and risks of the electrical drive technology.
• Knowledge of
DIN IEC 60364-5-54 .
• Knowledge of national safety regulations (e.g. DGUV regulation 3 ).
1.2 Transport, storage and proper use
The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. Drive converter shall be protected against excessive
strains.
Transport of drive converters with an edge length >75 cm
The transport by forklift without suitable tools can cause a deflection of the
heat sink. This leads to premature aging or destruction of internal components.
► Transport of drive converters on suitable pallets.
► Do not stack drive converters or burden them with other heavy objects.