KEB COMBIVERT G6, Programming Manual

Page: 11 / 60

11
Used standards
Used standards
DGUV regulation 3 Electrical systems and equipment
DIN 46228-1
Wire-end ferrules; Tube without plastic sleeve
DIN 46228-4 Wire-end ferrules; Tube with plastic sleeve
DIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection of
electrical equipment - Earthing arrangements, protective conductors and protec-
tive bonding conductors
EN 55011 Industrial, scientific and medical equipment - Radio frequency disturbance
characteristics - Limits and methods of measurement
EN 55021 Interference to mobile radiocommunications in the presence of impulse noise -
Methods of judging degradation and measures to improve performance
EN 60204-1 Safety of machinery - electrical equipment of machines Part 1: General require-
ments (VDE 0113-1, IEC 44/709/CDV)
EN 60439-1 Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and
partially type-tested assemblies
EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1 Insulation coordination for equipment within low-voltage systems Part 1: Princi-
ples, requirements and tests (IEC 60664-1)
EN 60721-3-1 Classification of environmental conditions - Part 3-1: Classification of groups of
environmental parameters and their severities - section 1: Storage
EN 60721-3-2 Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 2: Transport
EN 60721-3-3 Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 3: Stationary use at
weatherprotected locations
EN 61000-2-1 Electromagnetic compatibility (EMC) - Part 2: Environment - Section 1: Descrip-
tion of the environment - Electromagnetic environment for low-frequency
conducted disturbances and signalling in public power supply systems
EN 61000-2-4 Electromagnetic compatibility (EMC) - part 2-4: Environment; Compatibility
levels in industrial plants for low-frequency conducted disturbances
EN 61000-4-2 Electromagnetic compatibility (EMC) - part 4-2: Testing and measurement
techniques - Electrostatic discharge immunity test
EN 61000-4-3 Electromagnetic compatibility (EMC) - part 4-3: Testing and measurement
techniques - Radiated, radio-frequency, electromagnetic field immunity test
EN 61000-4-4 Electromagnetic compatibility (EMC) - part 4-4: Testing and measurement
techniques - Electrical fast transient/burst immunity test
EN 61000-4-5 Electromagnetic compatibility (EMC) - part 4-5: Testing and measurement
techniques - Surge immunity test
EN 61000-4-6 Electromagnetic compatibility (EMC) - part 4-6: Testing and measurement
techniques - Immunity to conducted disturbances, induced by radio-frequency fields
EN 61000-4-34 Electromagnetic compatibility (EMC) - part 4-34: Testing and measurement
techniques - Voltage dips, short interruptions and voltage variations immunity
tests for equipment with mains current more than 16 A per phase
EN 61373 Railway applications - Rolling stock equipment - Shock and vibration tests
EN 61508-1...7 Functional safety of electrical/electronic/programmable electronic safety-related
systems – Part 1...7 (VDE 0803-1…7, IEC 61508-1…7)
EN 61800-2 Adjustable speed electrical power drive systems - Part 2: General require-
ments - Rating specifications for low voltage adjustable frequency a.c. power