KEB COMBIVERT F5 Series, Instruction Manual

Page: 29 / 116

GB - 11
GB
The technical data is for 2/4-pole standard motors. With other pole numbers the inverter must be
dimensioned onto the motor rated current. Contact KEB for special or medium frequency motors.
Site altitude max. 2000m. With site altitudes over 1000m a power reduction of 1% per 100m must
be taken into consideration.
Technical Data
2.2 Technical Data 400V Class
1) With the regulated systems F5-M as well as F5-S 5% are to be subtracted as control reserve.
2) Max. current before the responding of the OL2-function (only F5-M; F5-S; F5-A)
3) Recommended minimum cross section of the motor wire for rated power and a cable length of upto 100m (copper)
4) This data is only valid for units with internal brake transistor GTR 7 (see "unit identification")
5) At mains voltage ≥ 460V multiply the nominal current with factor 0,86.
6) F5-Basic: 2 kHz
05 07 09 10 12 13 14
B B B D B D D B D E D E G D E G
3 3 3 3 3 3 3
[kVA] 0,9 1,8 2,8 4,0 6,6 8,3 11
[kW] 0,37 0,75 1,5 2,2 4,0 5,5 7,5
[A] 1,3 2,6 4,1 5,8 9,5 12 16,5
[A] 2,3 4,7 7,4 10,4 17 21,6 18 29,7 24,8
[A] 2,8 5,6 8,9 12,5 21 25,9 21,6 35,6 29,7
[A] 1,8 3,6 6 8 13 17 23
[A] 16 16 16 16 20 25 25
[kHz] 16 16 8 8 4 16 4 8 16 4 16 2 8 16
[kHz] 16 16 16 16 4 16 16
16
6) 16
[W] 60 90 80 105 120 140 170 150 185 300 185 250 200 185 320 380
[A] 1,3 2,6 4,1 5,8 9,5 12 14,5 16,5
[A] 1,3 2,6 4,1 5,8 5,2 5,8 - 9,5 9,5 12 7,4 16,5
[A] 1,3 2,6 3,5 4,9 3,5 5,8 - 5,8 9,5 5,8 12 5,7 10 12
[°C] 90
[mm²] 1,5 1,5 1,5 1,5 2,5 4 4
[Ohm] 390 120 120 82 82 39 56 39 50 56 39
[Ohm] 620 620 390 270 150 110 85
[A] 2,2 7,5 7,5 10 10 21 15 21 15 15 21
1
[Nm] 0,5 1,2 0,5 1,2
[V] 305...500 ±0 (400 V Nominal voltage)
[Hz] 50 / 60 +/- 2
[V] 3 x 0...U Mains
[Hz] see Control board
[m] 10 10 100 100 50 100 100 100
[m] 8 8 30 50 100 - 100 100 - 100
[m] 4 5 10 10 20 - 100 100 - 100
[°C] -25...70 °C
[°C] -10...45 °C
IP20
max. 95% without condensation
EN 61800-3
Germanischer Lloyd; EN 50155
3K3 in accordance with EN 50178
Mains voltage
5)
Mains frequency
Output voltage
Output frequency
Max.shielded motor line length at 4 kHz
Max.shielded motor line length at 8 kHz
Max.shielded motor line length at 16 kHz
Storage temperature
Operating temperature
Model / protective system
Relative humidity
EMC tested according to
Vibration/Jolt according to
Climatic category
Inverter Size
Housing size
Phases
Output nominal power
Max. rated motor power
Output nominal current
Max. short time current
1)
OC-tripping current
Nominal input current
Max. permissible mains fuse (inert)
Rated switching frequency
Max. switching frequency
Power loss at nominal operating
Stall current at 4kHz
2)
Stall current at 8kHz
2)
Stall current at 16kHz
2)
Max. heat sink temperature TOH
Motor line cross section
3)
Min. braking resistor
4)
Typ. braking resistor
4)
Max. braking current
Overload curve (page appendex)
Tightening torque for terminals