31
MOUNTING
4.2.4 Example 3: Brake with armature element - hub neck outside (e.g. 01…12-02-130-xxxx)
1.1
5
8
4
6.3
3
2.1
X
Figure 12: Example 3: Brake with armature element - hub neck outside (e.g. 01…12-02-130-xxxx)
►
The shaft of the motor and the mounting surface (3) must be constructed by way, that during mounting the
air gap X occurs automatically.
►
If necessary, the air gap X can be adjusted with adjusting washers between armature element (6.3) and
shaft (5).
►
Mount the feather key (4) into the shaft (5).
►
Mount the magnet (1.1) with the socket head screws (2.1) to the mounting surface (3).
►
Push the armature element (6.3) onto the motor shaft (5) with mounted feather key (4).
►
Secure the armature element (6.3) with a shaft-end disc or retaining ring or with a threaded pin (8) axially
onto the motor shaft (5). Check the air gap X. Adjust it, if necessary.
Figure 13: Mounting with threaded pin
Figure 14: Mounting with shaft-end disc