30
MOUNTING
4.2.3 Example 2: Brake with armature element - hub neck inside (e.g. 01…12-02-120-xxxx)
5
3
1.1
6.2
7
2.1
4
X
Figure 11: Example 2: Brake with armature element - hub neck inside (e.g. 01…12-02-120-xxxx)
►
The shaft of the motor and the mounting surface (3) must be constructed by way, that during mounting the
air gap X occurs automatically.
►
If necessary, the air gap X can be adjusted with adjusting washers between armature element (6.2) and
shaft (5).
►
Mount the feather key (4) into the shaft (5).
►
Mount the magnet (1.1) with the socket head screws (2.1) to the mounting surface (3).
►
Push the armature element (6.2) onto the motor shaft (5) with mounted feather key (4).
►
Secure the armature element (6.2) with a retaining ring (7) axial onto the motor shaft (5).
►
Check the air gap X. Adjust it, if necessary.