KEB 7608000-4001, Instructions For Use Manual

Page: 27 / 50

3.3 Degree of protection of servo motors
See table below for the respective sealing in face of power transmission elements
(transmissions etc.).
Shaft sealing
Degree of
protection
User information
No IP 65
The effect to moisture in the shaft and flange
area must be kept to a minimum. No liquid
may remain in the D end shield, if the motor
is mounted with the "shaft end upward" (IM
V3, IM V36).
Table 5: IP degree of protection
The specific degree of protection can only be complied, if the drive is mounted
to a gear box and the motor plug is properly attached!
27
TECHNICAL DATA