KEB 7608000-4001, Instructions For Use Manual

Page: 13 / 50

13
bASIC SAfETY INSTrUCTIONS
1 basic Safety Instructions
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specific safety instructions. This list is not exhaustive. Non-observance will lead to the
loss of any liability claims.
ATTENTION
Hazards and risks through ignorance.
► Read the instructions for use!
► Observe the safety and warning instructions!
► If anything is unclear, please contact KEB!
1.1 Target group
This instruction manual is determined exclusively for electrical personnel. Electrical per-
sonnel for the purpose of this instruction manual must have the following qualifications:
• Knowledge and understanding of the safety instructions.
• Skills for installation and assembly.
• Start-up and operation of the product.
• Understanding of the function in the used machine.
• Detection of hazards and risks of the electrical drive technology.
• Knowledge of
DIN IEC 60364-5-54 .
• Knowledge of national safety regulations (e.g. DGUV regulation 3 ).
1.2 Transport, storage and proper use
The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. Motors shall be protected against excessive strains.
ESD
Damage due to improper transport
► Transport only on suitable devices (folding boxes, transport frames, flat
pallets, usw) !
► Avoid any impacts, sharp sudden movements and strong vibrations!
► Motors must only be lifted and placed at creeping speed to prevent dam-
age to the bearings !
Do not store Motors
• in the environment of aggressive and/or conductive liquids or gases.
• with direct sunlight.
•
outside the specified environmental conditions.