KEB 7608000-4001, Instructions For Use Manual

Page: 11 / 50

11
STANDArDS fOr ASYNCHrONOUS AND SYNCHrONOUS MOTOrS
insulation systems (Type I) used in rotating electrical machines fed from voltage
converters - Qualification and quality control tests (IEC 60034-18-41)
EN 60034-18-42 Rotating electrical machines - Part 18-42: Partial discharge resistant electrical
insulation systems (Type II) used in rotating electrical machines fed from voltage
converters - Qualification tests (IEC 2/1798/CDV)
IEC/TS 60034-24 Rotating electrical machines - Part 24: Online detection and diagnosis of
potential failures at the active parts of rotating electrical machines and of bearing
currents - Application guide (IEC/TS 60034-24)
IEC 2/1689/CD Rotating electrical machines - Part 25: AC machines when used in power drive
systems - Application guide (IEC 2/1689/CD)
DIN EN 60034-30-1 Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC
motors (IE code) (IEC 60034-30-1)
DIN CLC/TS 60034-31 Rotating electrical machines - Part 31: Selection of energy-efficient motors
including variable speed applications - Application guide (IEC/TS 60034-31)
DIN 748-3 Cylindrical shaft ends - Part 3: For rotating electrical machinery
DIN SPEC 42955 Shaft extension run out and of mounting flanges for rotating electrical machinery,
frame size larger then 315 - Tolerances, test
DIN EN 50347 General purpose three-phase induction motors having standard dimensions and
outputs - Frame numbers 56 to 315 and flange numbers 65 to 740
DIN 6885-1 Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 332-2 Center holes 60° with thread for shaft ends for rotating electrical machines