background image

設定

 (Settings)

災害・避難情報

 (Disaster and Evacuation 

Information)

Check the receiving sound and vibration of the 
product for Disaster and Evacuation Information, 
and Tsunami Warning.

 

This service is available only in Japan (Not available overseas).

 

Emergency Rapid Mail is free of both information charges and 
communication charges.

 

Emergency Rapid Mail cannot be received while the power is turned off 
or during a call.

 

Emergency Rapid Mail may not be received during communication such 
as while sending and receiving e-mails/SMSs and while using the 
browser or when you are in a place where the signal cannot be received 
(e.g. tunnels and basements) or the signal is weak, even within the 
service area.

 

Emergency Rapid Mail which failed to be received will not be able to be 
received again.

 

When you receive Emergency Rapid Mail, you will be notified by the 
dedicated alarm tone and the vibrator. The alarm tone cannot be 
changed.

*  When you receive Earthquake Early Warning, you will be notified by the alarm 

tone, voice (“

地震です

” (Jishin-desu)) meaning that an earthquake has 

occurred and the vibrator.

 

Information intended for the areas of other than your present location 
may be received.

 

As for this service, the Company shall not be liable for any damage 
incurred on the users resulted from failure or delay of information delivery 
due to communication disturbance or system failure, contents of the 
information or other problems that are not supposed to be blamed on the 
Company.

 

For details on Earthquake Early Warning and Tsunami Warning provided 
by the Japan Meteorological Agency, refer to the agency’s homepage.  

(

http://www.jma.go.jp/jma/indexe.html

)

Earthquake Early Warning

 

Earthquake Early Warning notifies areas where a strong shaking (Japan 
seismic scale 4 or more) is expected when an earthquake whose 
maximum Japan seismic scale is predicted of 5-lower or more has been 
detected.

 

This service detects an earthquake (P-wave, preliminary tremors) near 
the seismic center immediately after the earthquake occurs and 
automatically calculates its location, scale and predicted strength of the 
shaking. After that, you will be notified of the earthquake as soon as 
possible within a few seconds to dozens of seconds before a strong 
shaking from the earthquake (S-wave, principal shock) occurs.

 

In the vicinity of the seismic center, a strong shaking may reach you 
before Earthquake Early Warning.

 

The Earthquake Early Warning distribution system provided by this 
service is different from that provided by TV, radio and other 
communication media and thus the arriving time of Earthquake Early 
Warning may be different among those media.

Tsunami Warning

 

Tsunami Warning notifies areas including target sea coasts of Major 
Tsunami Warning and Tsunami Warning provided by the Japan 
Meteorological Agency.

Disaster and Evacuation Information

 

Disaster and Evacuation Information notifies information related to the 
safety of citizens, such as evacuation advisories, evacuation orders or 
various alarms delivered by the national government or the local 
governments.

 

Using Disaster Voice Messaging Service

Disaster Voice Messaging Service is a service to record voices with a 
smartphone and deliver them as a voice message to people to whom you 
want to deliver the information that you are safe when large-scale disasters 
occur.

1

  From the au Disaster Countermeasure menu, [

災害用音声お

届けサービス

] (Disaster Voice Messaging Service).

Follow the on-screen instructions.

 

To use this service via Wi-Fi

®

, making initial settings via 4G(LTE/WiMAX 

2+)/3G networks is required.

 

Voice messages can be recorded for up to 30 seconds.

 

Voice messages can be exchanged among au phones as well as other 
carriers’ cell phones and PHS devices.

 

Voices may not be heard when the media sound volume is set to low.

4

Summary of Contents for aquos shl25





























Reviews: