Level adjustment studio music
The voice / audio system components are installed in
the back part of the tower. The potentiometer which
serves to adjust the external audio signal level is
accessible through a maintenance hatch on the left
hand side of the tower. To avoid overdrive, select
the level adjustment accordingly. The level setting
depends on the strength of the external signal and
should be carried out by a service engineer.
Bluetooth connection
To connect an external player (smartphone etc.) wire-
lessly to the solarium an optional Bluetooth interface
is available.
CONNECT EXTERNAL PLAYER
A Bluetooth connection can be established in
standby and during tanning mode.
Make sure that you are within the recep-
tion area (about 2 meters).
Make sure that your device is confi gured
to search for other bluetooth devices.
Should this not be the case, enable blue-
tooth manually. To do so, please read the
instructions for your appliance.
• Depending on your settings the search will be
performed automatically or manually. All available
bluetooth devices within reach will be listed after
a short time.
• Among the available devices choose “megaSun”.
In the service menu, a trailing number (01, 02, 03,
...) can be added to device name.
• If necessary confi rm the shown code and connect
again. Not every smart phone asks for a code.
megaSun 01
megaSun 01
• A two-time beep indicates that your device is con-
nected to the solarium.
megaSun 01
megaSun 01
O p e r a t i n g I n s t r u c t i o n s
|
megaSun pureEnergy 5.0
12
