O p e r a t i n g I n s t r u c t i o n s
|
megaSun pureEnergy 5.0
31
Defi nes the aquaCool and aroma cycle time (spray-
ing time + spraying interval). If „manual“ is selected,
by pressing the aquaCool- or Aroma plus button a
spray cycle can be triggered.
Factory setting
: manuel
㊵
>
> manuel
> 1 .. . 5 (min)
AQUA
03/06
Cycle time
Starts the aquaCool test (1 cycle).
㊶
AQUA
04/06
aquaCool start testcycle
> Start: press `+` for 2s
aquaCool start testcycle
aquaCool start testcycle
AQUA
aquaCool st
AQUA
aquaCool st
Starts the aquaCool endurance test. After having
selected and stored the “on” setting, you must
leave the service menu and start a tanning session.
Attention! aquaCool will continue to spray
permanently during a whole tanning session.
Factory setting
: off
㊷
>
> on
> off
AQUA
05/06
aquaCool endurance test
Starts the aquaCool initialization process. A
spraying cycle of 90 seconds is started to
bleed the system before commissioning, after a
repair operation or after a canister replacement.
㊸
AQUA
06/06
aquaCool initialization
> Start: press `+` for 2s
aquaCool initialization
aquaCool initialization
AQUA
aquaCool initialization
AQUA
aquaCool initialization
Not available in this system.
㊹
AROMA
01/07
Aroma
Not available in this system.
㊺
AROMA
02/07
Aromastatus reset
> Reset: press `-` for 2s
Not available in this system.
㊻
>
AROMA
03/07
Cycle time
Not available in this system.
㊼
>
AROMA
04/07
Aroma cabin automatic
Not available in this system.
㊽
>
AROMA
05/07
Aroma cycles per hour
