45
Operation and Service megaSun 7900
8.3.2 Menus of service level II
Confi guration
menus
ACS
In this menu functions can be activated or inactivated. This
makes sense when the corresponding function is missing or
temporarily not available (faded out).
C
Channel / Music channel
M
Music / Volume
A Air-conditioning
B Facial
tanner
The setting can be changed by pressing the “+” or “-“ key above
or below the symbol. If the two dots behind the letter are at the
bottom, the respective function is inactivated.
C
:
no channel selection possible,
B
:
facial tanner can be operated
This menu has three sub-menus: “Aircon.“, “OFFSET“ and
“A.START“.
Aircon.
•
Presetting for the air-conditioning unit in tanning
mode.
ON: The air-conditioning unit starts automatically as
•
soon as the tanning session is started.
OFF: The air-conditioning unit starts operating only if
•
it is activated by the studio guest.
OFFSET:
•
Only applicable for tanning units equipped with
ACS.
NOTE
: Contact your KBL Technical Service before making
any changes within this menu item.
Increasing the offset value results in the fan starting at a
higher speed. The offset value may have to be adjusted, e.g.
in case of the thermal switch of the sunbed being triggered
due to bad exhaust vent conditions in the tanning studio. The
offset value may only be increased after any other causes for
the triggering of the thermal switch have been excluded (see
section “Fault messages/exhaust air”).
00-99%: The offset value can be increased in steps of 10%.
A.START:
•
Presets the fan-power level at the beginning of
the tanning session. Adjustable from 20 to 99%. During the
tanning session, the studio guest can change the fan power
or switch off the fan.