O p e r a t i n g I n s t r u c t i o n s
|
KBL Tower beautyShaper
19
power supply cord.
A Class-A ground fault circuit interrupter (GFCI) has
to be used for Canada. Should the operation of the
device cause any interference in the power sup-
ply network, e.g. with ripple-control systems (TRA),
consult your power supply company to have corre-
sponding blocking elements (audio frequency sup-
pressors) installed.
GND
The device is by default set up to operate on 3 phases
but it can be changed over to 2-phase operation. The
wiring for 3-phase operation is shown below:
The wiring for 2-phase operation is shown below.
• Re-wire the 3 cables according to the diagram.
• Make sure that you use the right cable for the
power supply.
5.4 Connecting an external audio
source
The cinch marked in the illustration is connected to
the external audio source where the line-out of the
sound player or the headphone/loudspeaker jack are
available for connection.
5.5 Level adjustment studio
music
The voice / audio system components are installed
in the back part of the device. The potentiometer
which serves to adjust the external audio signal
level is accessible through a maintenance hatch on
the left hand side of the device. To avoid overdrive,
select the level adjustment accordingly. The level
setting depends on the strength of the external signal
and should be carried out by qualified, trained and
authorized service technicians.
Summary of Contents for beautyShaper
