WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 24 of 140
www.kbcnetworks.com
Qty Description
1
Bracket body
1
Pole clamp bracket
1
Connecting piece 1
1
Connecting piece 2
1
50mm, 1.98” long ¼” hex bolt
3
¼” hex nuts
1
27mm, 1.06” long ¼” hex bolt
3
Flat washers 15mm, 0.59”
3
Locking washers 10mm, 0.39” long
1
U bolt
4
¼-20 lock washers
•
Remove all packaging material
•
Remove 50mm bolt, flat washer, locking washer and hex nut.
•
Mount back plate to front WESII assembly plate.
•
Replace flat washer, locking washer and hex nut.
•
Remove ‘U’ shaped bolt.
•
Bolt the unit to the pole.
•
Up/Down Alignment offers one position when using the pre-fabricated channel
lock grooves on the swivel brackets. Directional antennas may require additional
up/down alignment angles than those allowed on the pre-fabricated grooves. To
achieve different angles, remove the 50mm Hex bolt. Insert the longer bolt and
add the star washer. Re-connect and tighten.
•
Position the WESII unit to face the WESII unit at the other end of the link.
•
Carry out the alignment process – see Section 10.4 for instructions and Section 7
for LED status information.
•
When in the best position, tighten.
