WESII User Manual
Manual-WESII-Rev1403
Copyright © KBC Networks 2014
Page 118 of 140
www.kbcnetworks.com
11.2.4 Topology
The system mapping capability of the topology page enables end users to view system
configuration and health all on one page. WESII topology shows the links between
different Station/Clients and Host/APs. System mapping supports dynamic changes in
the network so as the network changes it learns the new topology and updates this on
the topology webpage.
Along with system mapping, the topology view also displays all node information; this
can be viewed by holding your mouse over a particular node and radio. Node hover over
will display following node information:
•
Node IP address
•
Bridge MAC address
•
Root bridge information
•
Gateway information
•
Radio up/down status
•
Radio Host/Client role
•
Connected peer information
If any parameter eg. IP address , node name , SSID etc changes then topology reports
updates accordingly.
Note:
Only KBC Network nodes are shown on the topology page.
If any node goes down within the network then it is shown in red after 100 seconds
(default). If it then remains down for more than 200 seconds (default) the node entry
will be removed from topology view. When the node is reconnected to the network it will
be added back to the topology.
Link connection lines are shown in different colors, these represent different ranges of
