KBC WESII Series User Manual Download Page 139 | Manualshive

Page: 139 / 141

background image

WESII User Manual

Manual-WESII-Rev1403
Copyright © KBC Networks 2014

Page 138 of 140

www.kbcnetworks.com

12.5 Contact KBC Technical Assistance

Below is the contact information for KBC:

Technical Support Availability

This manual is comprehensive to the extent that it will answer many of your technical
questions. Our toll free technical assistance is available should you require additional
assistance. KBC offers technical support over the phone or by way of e-mail to all KBC
integrators, dealers and end users of the WES products. Our technical support hotline is
available during regular US west coast business hours, Monday through Friday on all
non-major holiday business days. KBC will follow up on all electronic inquiries before the
end of the following business day.

NORTH AMERICA (TOLL-FREE)
888-366-4276: Monday – Friday 10am-8pm Eastern (7am-5pm Pacific)

[email protected]

: 24hr availability, response time varies

HAWAII & ALASKA / GUAM, PR & OTHER US TERRITORIES
949-297-4930: Monday – Friday 7am-5pm Pacific Time

[email protected]

: 24hr availability, response time varies

Note: the toll free 888# does not work from Alaska

CENTRAL / SOUTH AMERICA

[email protected]

: 24hr availability, response time varies

ASIA

[email protected]

: 24hr availability, response time varies

SOUTH PACIFIC / PACIFIC ISLANDS

[email protected]

: 24hr availability, response time varies

EUROPE
+44(0)1622 618787: Monday – Friday 9am-5pm UK time

[email protected]

: 24hr availability, response time varies

AFRICA & MIDDLE EAST

[email protected]

: 24hr availability, response time varies

Technical Support is offered in English; however, KBC Networks has worldwide
representatives who can provide technical support in many local languages.

Note

:

technical assistance is available after having read through this manual.

Comprehension of terms and topics will assist in trouble-shoot procedures.

«
...
137
138
139
140
141
»

Summary of Contents for WESII Series














































































































































Reviews:

No comments

Related manuals for WESII Series

Brand: Paradyne Pages: 22

Brand: Laird Pages: 36

Brand: Datasheen Pages: 25

Brand: RAK Pages: 30

IBOX-BAC Series

Brand: IntesisBox Pages: 2

WRT54GR - Wireless-G Broadband Router

Brand: Linksys Pages: 81

Brand: Advantech Pages: 50

Brand: Moxa Technologies Pages: 36

Brand: Dahua Pages: 113

Husky HMG-1648EP

Brand: Ethernet Direct Pages: 16

LEDWALL Optimizer HQ P2

Brand: Gundermann VIDEOWALL Pages: 12

Brand: Tripp Lite Pages: 2

Brand: Supero Pages: 53

Brand: ZyXEL Communications Pages: 8

CORE 2 DUO E4000 - 3-2008

Brand: Intel Pages: 122

Brand: Perle Pages: 4

Macho Rev. A (BW)

Brand: Thermalright Pages: 32

Brand: Disc Makers Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands