Kaysun KP-35 HN8, Owner'S Manual

Page: 12 / 24

Operation
12
Fan/Ion button (Ion is optional)
Control the fan speed. Press to select the fan speed
in four steps-LOW, MID, HIGH and AUTO. The fan speed indicator light illuminates under
different fan
settings except AUTO speed. When select AUTO fan speed, all the fan indicator lights turn dark.
NOTE: Press this button for 3 seconds to initiate ION feature. The ion generator is energized and will help to
remove pollen and impurities from the air, and trap them in the filter. Press it for 3 seconds again to stop the
ION feature.
Sleep(Eco) button
Used to initiate the SLEEP/ECO operation.
Power button
Power switch on/off.
LED display
Shows the set temperature in °C or °F ( "°F" no
display for unit with POWER MANAGEMENT feature) and the Auto-timer settings. While on DRY and FAN
modes, it shows the room temperature. Shows Error codes and protection code:
E1-Room temperature sensor error.
E2-Evaporator temperature sensor error.
E3-Condenser temperature sensor error (on some models).
E4-Display panel communication error.
EC-Refrigerant leakage detection malfunction (on some models).
P1-Bottom tray is full--Connect the drain hose and drain the collected water away. If protection repeats, call
for service.
Note: When one of the above malfunctions occurs, turn off the unit, and check for any obstructions.
Restart the unit, if the malfunction is still present, turn off the unit and unplug the power cord.
Contact the manufacturer or its service agents or a similar qualified person for service.