Installation
9
Note: Once the Exhaust Hose assembly and Adjustable Window Slider are prepared, choose from one of the following three installation methods.
Type 1: Hung Window Installation(optional)
Foam seal B
(Adhesive type-shorter)
Window. Window slider B
Foam seal A sliderA. (If required)
(Adhesive type)
Cut the adhesive foam seal A and B strips to the
proper lengths and attach them to the window sash
and frame as shown.
Insert the window slider assembly into the
window opening.
Foam seal C
(Non-adhesive type) Security Bracket
2 Screws
Cut the non-adhesive foam seal C strip to match the
width of the window. Insert the seal between the glass
and the window frame to prevent air and insects from
Getting into the room.
If desired, install the security bracket with 2 screws as
shown.
Insert the window slider adaptor into the hole of
the window slider.
Summary of Contents for KP-35 HN8
