Kaysun KP-35 HN8, Owner'S Manual

Page: 7 / 24

Installation
7
Choosing The Right Location
Your installation location should meet the following requirements:
-Make sure that you install your unit on an even surface to minimize noise and vibration.
-The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of the unit)
must be accessible.
-The unit should be located at least 30cm (12”) from the nearest wall to ensure proper air conditioning.
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this could cause damage to the
unit.
Note About Fluorinated Gasses
-Fluorinated greenhouse gases are contained in hermetically sealed equipment. For specific information on the
type, the amount and the CO2 equivalent in tones of the fluorinated greenhouse gas (on some models), please
refer to the relevant label on the unit itself.
-Installation, service, maintenance and repair of this unit must be performed by a certified technician.
-Product uninstallation and recycling must be performed by a certified technician.
NOTE:
All the illustrations in the manual are for explanation purpose only. Your machine may be slightly different. The
actual shape shall prevail.
The unit can be controlled by the unit control panel alone or with the remote controller. This manual does not
include Remote Controller Operations, see the
<<Remote Controller Instruction>> packed with the unit for details.