9
Installation
Choosing The Right Location
Your installation location should meet the following requi-
rements:
- Make dure that you install your unit on an even surface to
minimize noise and vibration.
- The unit must be installed near a grounded plug, and the
Collection Tray Drain (found on the back of the unit) must
be accessible.
- The unit should be located at leat 30cm (12”) from the
nearest wall to ensure proper air conditioning.
- DO NOT cover the Intaked, Outlets or Remote Signal Re-
ceptor of the unit, as this could cause damage to the unit.
50cm
19.7inch
Recommend Installation
NOTE:
All the illustrations in the manual are for explanation purpo-
se only. Your machine may be slightly different. The actual
shape shall prevail.
The unit can be controlled by the unit control panel alone
or with the remote controller. This manual does not include
Remote Controller Operations, see the <<Remote Control
Illustration>> packed with the unit for details.
When there are wide differences between “INSTRUCTION
MANUAL” and “Remote controll Illustration” on function
description, the description on “INSTRUCTION MANUAL”
shall prevail.
Tools Needed
- Medium Philips screwdriver
- Tape measure or ruler
- Knife or scissors
- Saw (optional, to shorten window adaptor for narrow windows)
Accessories
Check your window size and choose the fit window slider.
Summary of Contents for KP-35 CP10
Page 20: ......
