Kaysun KMF-400 DN3, Installation Manual

Page: 15 / 20

Outdoor power supply
6.6 Electric control system wiring diagram
Switch
Fuse
Outdoor unit
Outdoor unit monitor
power supply
K1 K2 E O A E X Y E P Q E A B C N
Outdoor unit monitor
(Optional)
L N
K1K2 E
Power supply of indoor
unit centralized controller
Indoor unit
centralized controller
(Optional)
L N
X Y E
Power supply of
Digital electric meter
(Optional)
L N
O A E
Please use shield cable and the
shield cable should ground wiring.
L N P Q E L N P Q E L N P Q E L N P Q E
Indoor unit Indoor unit Indoor unit Indoor unit
Fuse Fuse
Fuse Fuse
Switch
Indoor unit
power supply
Distribution box Distribution box Distribution box Distribution box
Fig.6-4
CAUTION
Wrong wiring may damage copressor and other components.
PQE connects to weak current signal wire, don’t connect it to strong current.All the connecting terminal should be fastened reliably, ground
wire should be grounded correctly.
Use wiring terminal power supply wire with a torus. After power supply wire has been connected to the wiring base, it needs to be reliably
fastened.
Power on after a careful inspection and make sure there’s no mistakes.
6.7 Indoor and outdoor unit control wiring
Outdoor unit
P Q E
NOTE: wire controller in the dotted line is optionals,
if necessary please contact to the dealer to buy.
Please use shield cable and the
shield cable should ground wiring.
Indoor unit Indoor unit Indoor unit
Indoor unit
P Q E P Q E P Q E P Q E
Only the last indoor unit needs
add matched resistance at P, Q
terminal.
Matched
resistance
Remote
controller
Wire
controller
Fig.6-5
installation manual
14